What are you looking for?

    Filters

    Virantage® VW-10200 RP

    Chemical category - PESU (Polyethersulfone)
    Amorphous, high-temperature sulfone polymer powder, features reactive end groups to enhance solubility
    Product functions: Good Color Stability, Paintability, High Gloss, Colorable, Good Surface Finish, Bromine Free, Low VOC, High ESCR (Stress Crack Resist.), Good Dimensional Stability, Alkali Resistant, Acid Resistant, Alcohol Resistant, Mineral/Synthetic Oil Resistant, Detergent Resistant, Hydrolysis Resistant, Low Moisture Absorption, Good Impact Resistant, Low CLTE, Radiotranslucent, Transparency, Laser Weldable, Low Warpage, Good Processing Stability, Heat Sterilizable, Good Thermal Stability, High Heat Resistant

    surfacemaster905

    Chemical category - Epoxy
    SURFACE MASTER® 905 is a next generation surface film that delivers a step increase in surface quality versus currently available products. Use of SURFACE MASTE

    FM 73

    Chemical category - Epoxy
    250°F (121°C) cure toughened general purpose epoxy film adhesiveType: film | Temp: service temp < 320F | Process: autoclave | Proc Temp: 250 (121) | RT Lap:
    Product functions: Medium Service Temperature (70°C to 150°C)

    FM 3500 EZP

    Chemical category - Epoxy
    FM®3500EZP is a curing epoxy peel ply optimized to provide consistent and reproducible surface for composite co-bonding or secondary bonding applications
    Product functions: High Service Temperature (>150°C)

    MB 1515-3

    Chemical category - Epoxy
    METLBOND® 1515-3 and METLBOND® 1515-3 HT are 350°F (177°C) curing modified epoxy supported film adhesives.
    Product functions: High Service Temperature (>150°C)

    APC (PEKK)/AS4D

    Chemical category - Polyetherketoneketone (PEKK)
    Solvay’s APC (PEKK-FC) composites consist of a thermoplastic matrix of poly (ether-ketone-ketone) commonly referred to as PEKK-FC polymer
    Product functions: Medium Service Temperature (70°C to 150°C)

    APC-2 (PEEK)/AS4

    Chemical category - Polyetherketoneketone (PEEK)
    Solvay’s APC -2 composites have a thermoplastic matrix of poly(ether-ether-ketone) commonly referred to as PEEK.
    Product functions: Medium Service Temperature (70°C to 150°C)

    APC-2/IM7

    Chemical category - Polyetherketoneketone (PEEK)
    Solvay’s APC -2 composites have a thermoplastic matrix of poly(ether-ether-ketone) commonly referred to as PEEK.
    Product functions: Medium Service Temperature (70°C to 150°C)

    FM® 490 BFM® 490B

    Chemical category - Epoxy
    FM® 490BFM® 490B is a modified epoxy core splice foam that may be cured at temperatures ranging from 225°F to 350°F (107°C to 177°C) by either free foaming or r
    Product functions: Medium Service Temperature (70°C to 150°C)

    BR® 6747-1NC

    Chemical category - Epoxy
    BR® 6747-1NC and BR® 6747-1NCB primers are one-part, non-chromated, modified epoxy primers which contain no volatile organic compounds (VOCs).
    Product functions: Medium Service Temperature (70°C to 150°C)

    CYCOM 4102A

    Chemical category - Polyester
    CYCOM®4102 is a polyester structural resin that is a flame-resistant version of CYCOM®4101. CYCOM® 4102 is available on a variety of reinforcing fibers. When co

    BR® 127 NC

    Chemical category - Epoxy
    BR® 127 NC corrosion inhibiting primer is the non-chromated version of our standard BR® 127 corrosion inhibiting primer.BR® 127 NC can be used with essentially
    Product functions: Medium Service Temperature (70°C to 150°C)

    BR 252

    Chemical category - Epoxy
    BR® 252 corrosion inhibiting primer is a non-chromated, one-part, modified epoxy bonding primer designed to meet stringent requirements of adhesive bonding prim
    Product functions: Medium Service Temperature (70°C to 150°C)

    CORFIL 658

    Chemical category - Epoxy
    Type: potting compound | Temp: service temp < 320F | Process: autoclave | Proc Temp: 250 (121) | Serv Temp: 284 - 347 (140 - 175) | Density: - | RT Comp: -
    Product functions: Medium Service Temperature (70°C to 150°C)

    BR 624 POTTING COMPOUND 1'S

    Chemical category - Epoxy
    BR® 624 potting compound is a one-part, low density material formulated for use in insert or edge filling of honeycomb sandwich construction.
    Product functions: Medium Service Temperature (70°C to 150°C)

    FM 300

    Chemical category - Epoxy
    FM® 300 is a 350⁰F (177⁰C) curing modified epoxy film adhesive available with three different moisture-resistant polyester
    Product functions: Medium Service Temperature (70°C to 150°C)

    CYCOM 890 RTM

    Chemical category - Epoxy
    Epoxy resin infusion systemType: resin | Temp: service temp < 320F | Process: out of autoclave | CAI KSI: medium | OHC Wet: medium | TG Wet: 336 (169) | Proc
    Product functions: Medium Service Temperature (70°C to 150°C)

    Cycom® 7701

    Chemical category - Epoxy
    Epoxy resin systemType: thermoset composite | Temp: service temp &lt; 320F | Process: autoclave | CAI KSI: low | OHC Wet: low | TG Wet: 190 (88) | Proc Temp: 25
    Product functions: Medium Service Temperature (70°C to 150°C)

    CYCOM 985

    Chemical category - Epoxy
    Epoxy resin systemType: thermoset composite, core splice foam | Temp: service temp < 320F> 500F | Process: autoclave | CAI KSI: low | OHC Wet: high | TG Wet: 34
    Product functions: High Service Temperature (>150°C)

    CYCOM 977-2

    Chemical category - Epoxy
    Toughened epoxy resin systemType: thermoset composite | Temp: service temp < 320F | Process: autoclave | CAI KSI: high | OHC Wet: medium | TG Wet: 284 (140)