What are you looking for?

    Filters

    Tecnoflon® P 959

    Chemical category - FKM
    Tecnoflon® P 959 is a medium viscosity, high fluorine (70%), peroxide curable fluoroelastomer. Tecnoflon® P 959 exhibits superior resistance to a wide variet…
    Product functions: Low VOC, Chlorine Resistant, Sour Gas Resistant, Good Glycol Resistance, Bio-Fuel Resistant, Fuel Resistant, Alkali Resistant, Acid Resistant, Alcohol Resistant, Mineral/Synthetic Oil Resistant, Detergent Resistant, Hydrolysis Resistant, Low Moisture Absorption, Dielectric Properties, Non Flammable, Flame Retardant, Good Tear Strength, Low Compression Set, Friction/Wear Improved, Low CLTE, UV Resistant, Radiation (Gamma) Resistant, Fast Cure, Good Adhesion, Good Mold Release, Good Processing Stability, Crosslinkable, Low Temperature Flexibility, Good Thermal Stability, High Heat Resistant

    Solef® 1015/1001

    Chemical category - PVDF (Polyvinylidene fluoride)
    Solef® 1015 PVDF homopolymer has very high viscosity, suitable for membrane manufacturing. It is available exclusively as powder. - Solef® 1015/1001: Powder…
    Product functions: Low VOC, High Purity, High ESCR (Stress Crack Resist.), Sour Gas Resistant, Acid Resistant, Mineral/Synthetic Oil Resistant, Detergent Resistant, Hydrolysis Resistant, Low Moisture Absorption, Piezoelectric Properties, Flame Retardant, Fatigue Resistant, High Hardness, High Stiffness, Creep Resistant, Good Impact Resistant, Low CLTE, UV Resistant, Radiation (Gamma) Resistant, Good Processing Stability, Autoclave Sterilizable (steam), E-beam Sterilizable, Radiation Sterilizable, Ethylene Oxide Sterilizable, Heat Sterilizable, Good Thermal Stability, High Heat Resistant

    Solef® 6020/1001

    Chemical category - PVDF (Polyvinylidene fluoride)
    Solef® 6020 PVDF homopolymer has very high viscosity for membranes and lithium batteries. It is available exclusively as powder. - Solef® 6020/1001: Powd…
    Product functions: Low VOC, High Purity, High ESCR (Stress Crack Resist.), Sour Gas Resistant, Acid Resistant, Mineral/Synthetic Oil Resistant, Detergent Resistant, Hydrolysis Resistant, Low Moisture Absorption, Piezoelectric Properties, Flame Retardant, Fatigue Resistant, High Hardness, High Stiffness, Creep Resistant, Good Impact Resistant, Low CLTE, UV Resistant, Radiation (Gamma) Resistant, Good Processing Stability, Autoclave Sterilizable (steam), E-beam Sterilizable, Radiation Sterilizable, Ethylene Oxide Sterilizable, Heat Sterilizable, Good Thermal Stability, High Heat Resistant

    Veradel® A-301 ULT NT

    Chemical category - PESU (Polyethersulfone)
    Veradel® A-301 ULT is a medium melt flow general purpose amorphous PESU resin for injection molding. This transparent grade offers a low amber color…
    Product functions: Good Color Stability, Paintability, High Gloss, Colorable, Good Surface Finish, Bromine Free, Low VOC, High ESCR (Stress Crack Resist.), Good Dimensional Stability, Alkali Resistant, Acid Resistant, Alcohol Resistant, Mineral/Synthetic Oil Resistant, Detergent Resistant, Hydrolysis Resistant, Low Moisture Absorption, Good Impact Resistant, Low CLTE, Radiotranslucent, Transparency, Laser Weldable, Low Warpage, Good Processing Stability, Heat Sterilizable, Good Thermal Stability, High Heat Resistant

    Ixef® BM-1524 NT 000

    Chemical category - PARA (Polyarylamide)
    50% glass fiber, Halogen-free FR, aircraft interiors
    Product functions: Platable, Paintability, High Gloss, Colorable, Good Surface Finish, Good Dimensional Stability, Mineral/Synthetic Oil Resistant, Low Moisture Absorption, Fatigue Resistant, High Stiffness, Creep Resistant, Low CLTE, Oxygen Barrier, Good Processing Stability

    Ixef® 3012 BK 001

    Chemical category - PARA (Polyarylamide)
    Glass/carbon fibers, high strength and stiffness, surface gloss
    Product functions: Platable, Paintability, High Gloss, Colorable, Good Surface Finish, Good Dimensional Stability, Mineral/Synthetic Oil Resistant, Low Moisture Absorption, Fatigue Resistant, High Stiffness, Creep Resistant, Low CLTE, Oxygen Barrier, Good Processing Stability

    Amodel® DW-1140 BK 938

    Chemical category - PPA (Polyphthalamide)
    40% glass fiber, approved for potable water contact
    Product functions: Chlorine Resistant, High ESCR (Stress Crack Resist.), Good Dimensional Stability, Sour Gas Resistant, Good Glycol Resistance, Bio-Fuel Resistant, Fuel Resistant, Alkali Resistant, Acid Resistant, Alcohol Resistant, Mineral/Synthetic Oil Resistant, Detergent Resistant, Hydrolysis Resistant, Low Moisture Absorption, Dielectric Properties, Impact Modified, Lubricated, Fatigue Resistant, High Hardness, High Stiffness, Creep Resistant, Good Impact Resistant, Low CLTE, Fast Molding Cycle, Hot Water Moldability, Good Adhesion, Laser Weldable, Good Mold Release, Low Warpage, Good Processing Stability, Heat Stabilized, Good Thermal Stability, High Heat Resistant

    Ixef® DW-1022 NT000

    Chemical category - PARA (Polyarylamide)
    50% glass fiber, global drinking water approvals
    Product functions: Platable, Paintability, High Gloss, Colorable, Good Surface Finish, Good Dimensional Stability, Mineral/Synthetic Oil Resistant, Low Moisture Absorption, Fatigue Resistant, High Stiffness, Creep Resistant, Low CLTE, Oxygen Barrier, Good Processing Stability

    Ixef® FC-1022 NT000

    Chemical category - PARA (Polyarylamide)
    50% glass fiber, FDA-approved for food contact
    Product functions: Platable, Paintability, High Gloss, Colorable, Good Surface Finish, Good Dimensional Stability, Mineral/Synthetic Oil Resistant, Low Moisture Absorption, Fatigue Resistant, High Stiffness, Creep Resistant, Low CLTE, Oxygen Barrier, Good Processing Stability

    Torlon® 4301

    Chemical category - PAI (Polyamide-imide)
    General purpose wear-resistance, contains PTFE and graphite
    Product functions: Fuel Resistant, Acid Resistant, Mineral/Synthetic Oil Resistant, Dielectric Properties, Non Flammable, Flame Retardant, High Hardness, Low CLTE, Good Mold Release, Carbon Fibre Reinforcement, Glass Fibre Reinforcement, Good Thermal Stability, High Heat Resistant

    AvaSpire® AV-651 NT

    Chemical category - PAEK (Polyaryletherketone)
    Better ductility and higher HDT than comparable PEEK, high melt flow for injection molding
    Product functions: Colorable, Good Surface Finish, Halogen Free, Bromine Free, Low VOC, High Purity, Chlorine Resistant, High ESCR (Stress Crack Resist.), Good Dimensional Stability, Sour Gas Resistant, Good Glycol Resistance, Bio-Fuel Resistant, Fuel Resistant, Alkali Resistant, Acid Resistant, Alcohol Resistant, Mineral/Synthetic Oil Resistant, Detergent Resistant, Hydrolysis Resistant, Low Moisture Absorption, Dielectric Properties, Flame Retardant, Lubricated, Good Tear Strength, Fatigue Resistant, Friction/Wear Improved, High Hardness, High Stiffness, Creep Resistant, Good Impact Resistant, Low CLTE, Low Warpage, Good Processing Stability, Carbon Fibre Reinforcement, Glass Fibre Reinforcement, Good Thermal Stability, High Heat Resistant

    AvaSpire® AV-621 NT

    Chemical category - PAEK (Polyaryletherketone)
    Highest performing unreinforced AvaSpire grade, tough, better ductility and higher HDT than comparable PEEK, low melt flow for extrusion and injection molding
    Product functions: Colorable, Good Surface Finish, Halogen Free, Bromine Free, Low VOC, High Purity, Chlorine Resistant, High ESCR (Stress Crack Resist.), Good Dimensional Stability, Sour Gas Resistant, Good Glycol Resistance, Bio-Fuel Resistant, Fuel Resistant, Alkali Resistant, Acid Resistant, Alcohol Resistant, Mineral/Synthetic Oil Resistant, Detergent Resistant, Hydrolysis Resistant, Low Moisture Absorption, Dielectric Properties, Flame Retardant, Lubricated, Good Tear Strength, Fatigue Resistant, Friction/Wear Improved, High Hardness, High Stiffness, Creep Resistant, Good Impact Resistant, Low CLTE, Low Warpage, Good Processing Stability, Carbon Fibre Reinforcement, Glass Fibre Reinforcement, Good Thermal Stability, High Heat Resistant

    Veradel® 3600 RP

    Chemical category - PESU (Polyethersulfone)
    Lower molecular weight with a higher level of functionality
    Product functions: Good Color Stability, Paintability, High Gloss, Colorable, Good Surface Finish, Bromine Free, Low VOC, High ESCR (Stress Crack Resist.), Good Dimensional Stability, Alkali Resistant, Acid Resistant, Alcohol Resistant, Mineral/Synthetic Oil Resistant, Detergent Resistant, Hydrolysis Resistant, Low Moisture Absorption, Good Impact Resistant, Low CLTE, Radiotranslucent, Transparency, Laser Weldable, Low Warpage, Good Processing Stability, Heat Sterilizable, Good Thermal Stability, High Heat Resistant

    Ixef® 1524/0008

    Chemical category - PARA (Polyarylamide)
    50% glass fiber, halogen-free flame retardant
    Product functions: Platable, Paintability, High Gloss, Colorable, Good Surface Finish, Good Dimensional Stability, Mineral/Synthetic Oil Resistant, Low Moisture Absorption, Fatigue Resistant, High Stiffness, Creep Resistant, Low CLTE, Oxygen Barrier, Good Processing Stability

    Ixef® BXT-2000/0203

    Chemical category - PARA (Polyarylamide)
    Low permeation to auto fluids and fuels, extrusion, blow molding
    Product functions: Platable, Paintability, High Gloss, Colorable, Good Surface Finish, Good Dimensional Stability, Mineral/Synthetic Oil Resistant, Low Moisture Absorption, Fatigue Resistant, High Stiffness, Creep Resistant, Low CLTE, Oxygen Barrier, Good Processing Stability

    Udel® P-3500 LCD MB7

    Chemical category - PSU (Polysulfone)
    High viscosity Polysulfone for fabrication of porous MF and UF hollow fiber and flat sheet membranes and microporous NF and RO substrates...
    Product functions: Good Color Stability, Paintability, High Gloss, Colorable, Good Surface Finish, Bromine Free, Low VOC, High ESCR (Stress Crack Resist.), Good Dimensional Stability, Alkali Resistant, Acid Resistant, Alcohol Resistant, Mineral/Synthetic Oil Resistant, Detergent Resistant, Hydrolysis Resistant, Low Moisture Absorption, Good Impact Resistant, Low CLTE, Radiotranslucent, Transparency, Radiation (Gamma) Resistant, Laser Weldable, Low Warpage, Good Processing Stability, Autoclave Sterilizable (steam), E-beam Sterilizable, Radiation Sterilizable, Ethylene Oxide Sterilizable, Heat Sterilizable, Good Thermal Stability, High Heat Resistant

    Udel® P-1700 CL 2611 CMP

    Chemical category - PSU (Polysulfone)
    Transparent, general purpose for injection molding
    Product functions: Good Color Stability, Paintability, High Gloss, Colorable, Good Surface Finish, Bromine Free, Low VOC, High ESCR (Stress Crack Resist.), Good Dimensional Stability, Alkali Resistant, Acid Resistant, Alcohol Resistant, Mineral/Synthetic Oil Resistant, Detergent Resistant, Hydrolysis Resistant, Low Moisture Absorption, Good Impact Resistant, Low CLTE, Radiotranslucent, Transparency, Radiation (Gamma) Resistant, Laser Weldable, Low Warpage, Good Processing Stability, Autoclave Sterilizable (steam), E-beam Sterilizable, Radiation Sterilizable, Ethylene Oxide Sterilizable, Heat Sterilizable, Good Thermal Stability, High Heat Resistant

    Udel® GF-120 NT

    Chemical category - PSU (Polysulfone)
    20% glass fiber
    Product functions: Good Color Stability, Paintability, High Gloss, Colorable, Good Surface Finish, Bromine Free, Low VOC, High ESCR (Stress Crack Resist.), Good Dimensional Stability, Alkali Resistant, Acid Resistant, Alcohol Resistant, Mineral/Synthetic Oil Resistant, Detergent Resistant, Hydrolysis Resistant, Low Moisture Absorption, Good Impact Resistant, Low CLTE, Radiotranslucent, Transparency, Radiation (Gamma) Resistant, Laser Weldable, Low Warpage, Good Processing Stability, Autoclave Sterilizable (steam), E-beam Sterilizable, Radiation Sterilizable, Ethylene Oxide Sterilizable, Heat Sterilizable, Good Thermal Stability, High Heat Resistant

    Radel® R-5000 NT

    Chemical category - PPSU (Polyphenylsulfone)
    Radel® R-5000 is a transparent polyphenylsulfone (PPSU) which offers exceptional hydrolytic stability, and toughness superior to other commercially-available…
    Product functions: Good Color Stability, Paintability, High Gloss, Colorable, Good Surface Finish, Bromine Free, Low VOC, High ESCR (Stress Crack Resist.), Good Dimensional Stability, Alkali Resistant, Acid Resistant, Alcohol Resistant, Mineral/Synthetic Oil Resistant, Detergent Resistant, Hydrolysis Resistant, Low Moisture Absorption, Non Flammable, Flame Retardant, Good Impact Resistant, Low CLTE, Radiotranslucent, Transparency, Radiation (Gamma) Resistant, Laser Weldable, Low Warpage, Good Processing Stability, Glass Fibre Reinforcement, Autoclave Sterilizable (steam), E-beam Sterilizable, Radiation Sterilizable, Ethylene Oxide Sterilizable, Heat Sterilizable, Good Thermal Stability, High Heat Resistant

    Torlon® 5030 HF

    Chemical category - PAI (Polyamide-imide)
    30% glass fiber, high stiffness, high strenght, good retention of stiffness at high temperatures, very low creep
    Product functions: Fuel Resistant, Acid Resistant, Mineral/Synthetic Oil Resistant, Dielectric Properties, Non Flammable, Flame Retardant, High Hardness, Low CLTE, Good Mold Release, Carbon Fibre Reinforcement, Glass Fibre Reinforcement, Good Thermal Stability, High Heat Resistant