Tecnoflon® VPL 45535 is a brand new generation very low temperature peroxide curable fluoroelastomer with outstanding low temperature flexibility (TR10=35°C). Like all other Tecnoflon® peroxide curable grades, it exhibits excellent processability; moreover it needs very short post curing cycles.
Some of the basic properties of Tecnoflon® VPL 45535 are:
- Outstanding low temperature flexibility
- Excellent chemical resistance, especially in alcohol containing fuels
- Low post cure
- Superior mold flow
- Lack of mold fouling
- Excellent mold release
Tecnoflon® VPL 45535 can be used for compression, injection, injectioncompression and transfer molding of Orings, gaskets and seals. Tecnoflon® VPL 45535 can be combined with the cure system and other typical fluoroelastomer compounding ingredients. Mixing can be accomplished with two roll mills or internal mixers. Tecnoflon® VPL 45535 can be extruded into hoses or profiles and can be calendered to make sheet stocks or belting. Finished goods may be produced by a variety of rubber processing methods.
Some of the basic properties of Tecnoflon® VPL 45535 are:
- Outstanding low temperature flexibility
- Excellent chemical resistance, especially in alcohol containing fuels
- Low post cure
- Superior mold flow
- Lack of mold fouling
- Excellent mold release
Tecnoflon® VPL 45535 can be used for compression, injection, injectioncompression and transfer molding of Orings, gaskets and seals. Tecnoflon® VPL 45535 can be combined with the cure system and other typical fluoroelastomer compounding ingredients. Mixing can be accomplished with two roll mills or internal mixers. Tecnoflon® VPL 45535 can be extruded into hoses or profiles and can be calendered to make sheet stocks or belting. Finished goods may be produced by a variety of rubber processing methods.
Synonyms |
---|
Fluorelastomer
|
Markets
Segments | Applications | End uses |
---|---|---|
Propulsion | Engines | Ducts |
Critical Operating Systems | Hydrolic & Fluids Systems | |
Critical Operating Systems | Fuel Management Systems | |
Critical Operating Systems | Landing Gears |
Processing Method
- Calendering
- Compounding
- Compression Molding
- Extrusion
- Injection Molding
- Transfer Molding
Chemical categories
Chemical category | Chemical family | Chemical product |
---|---|---|
Elastomers | Fluorinated Elastomers | FKM |
Product Functions
- Low VOC
- Chlorine Resistant
- Sour Gas Resistant
- Good Glycol Resistance
- Bio-Fuel Resistant
- Fuel Resistant
- Alkali Resistant
- Acid Resistant
- Alcohol Resistant
- Mineral/Synthetic Oil Resistant
- Detergent Resistant
- Hydrolysis Resistant
- Low Moisture Absorption
- Dielectric Properties
- Non Flammable
- Flame Retardant
- Good Tear Strength
- Low Compression Set
- Friction/Wear Improved
- Low CLTE
- UV Resistant
- Radiation (Gamma) Resistant
- Fast Cure
- Good Adhesion
- Good Mold Release
- Good Processing Stability
- Crosslinkable
- Low Temperature Flexibility
- Good Thermal Stability
- High Heat Resistant
Format
Physical form |
---|
Slab
|
Region of availability
- Not available in Africa & Middle East
- Asia Pacific
- Not available in Europe
- Not available in Latin America
- Not available in North America