Tecnoflon® P 459 is a low viscosity, high fluorine (70%), peroxide curable fluoroelastomer. Tecnoflon® P 459 exhibits superior resistance to a wide variety of chemicals, coupled with excellent processability and optimum compression set. Tecnoflon® P 459 can be cross-linked using organic peroxides in conjunction with a co-agent. Tecnoflon® P 459 is a lower viscosity version of Tecnoflon® P 959: please refer to Tecnoflon® P 959 Technical data sheet for data on chemical resistance.
Some of the basic properties of Tecnoflon® P 459 are:
- Low post cure
- Superior mold flow
- Lack of mold fouling
- Excellent mold release
- Good chemical resistance
- Alcohol containing fuels
- Steam
- Fluids containing amine additives
Tecnoflon® P 459 can be used for injection and transfer molding of shaft seals, valve seals, O-rings, gaskets or any item requiring superior chemical resistance. Tecnoflon® P 459 can be combined with the cure system and other typical fluoroelastomer compounding ingredients. Mixing can be accomplished with two roll mills or internal mixers. Tecnoflon® P 459 can be extruded into hoses or profiles and can be calendered to make sheet stocks or belting. Finished goods may be produced by a variety of rubber processing methods.
Some of the basic properties of Tecnoflon® P 459 are:
- Low post cure
- Superior mold flow
- Lack of mold fouling
- Excellent mold release
- Good chemical resistance
- Alcohol containing fuels
- Steam
- Fluids containing amine additives
Tecnoflon® P 459 can be used for injection and transfer molding of shaft seals, valve seals, O-rings, gaskets or any item requiring superior chemical resistance. Tecnoflon® P 459 can be combined with the cure system and other typical fluoroelastomer compounding ingredients. Mixing can be accomplished with two roll mills or internal mixers. Tecnoflon® P 459 can be extruded into hoses or profiles and can be calendered to make sheet stocks or belting. Finished goods may be produced by a variety of rubber processing methods.
| Synonyms |
|---|
|
Fluorelastomer
|
Markets
| Segments | Applications |
|---|---|
| Water Treatment | Equipment |
| Segments | Applications |
|---|---|
| Food Packaging & Processing | Food Processing |
| Segments | Applications |
|---|---|
| Industrial Equipment | Industrial Equipment Parts |
Processing Method
- Calendering
- Compounding
- Extrusion
- Injection Molding
- Transfer Molding
Chemical categories
| Chemical category | Chemical family | Chemical product |
|---|---|---|
| Elastomers | Fluorinated Elastomers | FKM |
Product Functions
- Low VOC
- Chlorine Resistant
- Sour Gas Resistant
- Good Glycol Resistance
- Bio-Fuel Resistant
- Fuel Resistant
- Alkali Resistant
- Acid Resistant
- Alcohol Resistant
- Mineral/Synthetic Oil Resistant
- Detergent Resistant
- Hydrolysis Resistant
- Low Moisture Absorption
- Dielectric Properties
- Non Flammable
- Flame Retardant
- Good Tear Strength
- Low Compression Set
- Friction/Wear Improved
- Low CLTE
- UV Resistant
- Radiation (Gamma) Resistant
- Fast Cure
- Good Adhesion
- Good Mold Release
- Good Processing Stability
- Crosslinkable
- Low Temperature Flexibility
- Good Thermal Stability
- High Heat Resistant
Format
| Physical form |
|---|
|
Slab
|
Region of availability
- Not available in Africa & Middle East
- Asia Pacific
- Not available in Europe
- Not available in Latin America
- Not available in North America