Tecnoflon® N 535 is a low viscosity fluoroelastomer copolymer. Tecnoflon® N 535 is intended as a general purpose fluoroelastomer. It can be blended with other polymers of the Tecnoflon® family to meet specific requirements. Tecnoflon® N 535 does not contain curatives: therefore the proper levels of Tecnoflon® FOR M1 and Tecnoflon® FOR M2 must be added to achieve the required properties. It can be also cured with diamine based systems.
Some of the unique properties of Tecnoflon® N 535 are:
- Excellent compression set
- Lack of mould fouling
- Superior extrusion behaviour
- Superior mould flow
- Excellent mould release
Tecnoflon® N 535 can be used for injection and transfer moulding of O-rings, gaskets and seals. Tecnoflon® N 535 can be mixed using typical fluoroelastomers compounding ingredients and mixing can be accomplished with two roll mills or internal mixers. Compounds based on Tecnoflon® N 535 can be dispersed in solvents for coating applications. Tecnoflon® N 535 can be extruded into hoses or profiles and can be calendered to make sheet stocks or belting. Finished goods can be produced by a variety of rubber processing methods.
Some of the unique properties of Tecnoflon® N 535 are:
- Excellent compression set
- Lack of mould fouling
- Superior extrusion behaviour
- Superior mould flow
- Excellent mould release
Tecnoflon® N 535 can be used for injection and transfer moulding of O-rings, gaskets and seals. Tecnoflon® N 535 can be mixed using typical fluoroelastomers compounding ingredients and mixing can be accomplished with two roll mills or internal mixers. Compounds based on Tecnoflon® N 535 can be dispersed in solvents for coating applications. Tecnoflon® N 535 can be extruded into hoses or profiles and can be calendered to make sheet stocks or belting. Finished goods can be produced by a variety of rubber processing methods.
| Synonyms |
|---|
|
Fluorelastomer
|
Markets
| Segments | Applications |
|---|---|
| Industrial Equipment | Industrial Equipment Parts |
Processing Method
- Calendering
- Compounding
- Extrusion
- Injection Molding
- Transfer Molding
Chemical categories
| Chemical category | Chemical family | Chemical product |
|---|---|---|
| Elastomers | Fluorinated Elastomers | FKM |
Product Functions
- Low VOC
- Good Glycol Resistance
- Bio-Fuel Resistant
- Fuel Resistant
- Mineral/Synthetic Oil Resistant
- Hydrolysis Resistant
- Low Moisture Absorption
- Dielectric Properties
- Non Flammable
- Flame Retardant
- Low Compression Set
- Low CLTE
- UV Resistant
- Radiation (Gamma) Resistant
- Fast Cure
- Good Adhesion
- Good Mold Release
- Good Processing Stability
- Crosslinkable
- Low Temperature Flexibility
- Good Thermal Stability
- High Heat Resistant
Format
| Physical form |
|---|
|
Slab
|
Compliance Info
- WEEE
- RoHS Compliance
- Food Contact
One or more drinking water/plumbing or food contact listings may exist, please contact your Account Manager for specifications.
Region of availability
- Not available in Africa & Middle East
- Asia Pacific
- Not available in Europe
- Not available in Latin America
- Not available in North America